Ready To Get Your Machine Working Like New?

At C&S Machine Co. in ​​Thomasville, GA, we have the tools and expertise to keep your machine looking and running like new again. Our team has vast experience and is dedicated to giving you the results you’re looking for. From walk-in customers to local businesses to industrial and agricultural companies, we serve anyone with a need. We can repair almost anything–except a broken heart and a rainy day!

Our Machine Repair Services & Capabilities

Machine Shop

With our full in-house, CAD/CAM design facilities, we are able to assist customers in the development of products to meet specific requirements. Our facility benefits from the ability to draw on over four decades of firsthand experience, resulting in practical and workable solutions to customers’ problems.

In our facility of 20,000 square feet, we are equipped with 15 Engine Lathes, which have machining capabilities of up to 48′ diameter and lengths up to 20 feet.

  • 4 – Bridgeport Vertical Mills
  • 2 – #3 Horizontal Mills
  • 3 – Metal Saws up to 18 rounds
  • 1 – Jig Bore Mill
  • 1 – Key Seating Machine with 1′ capacity
  • 1 – Radial Drill Press
  • 4 – Vertical CNC Machining Center – 3 axes
  • 1 – Vertical CNC Machining Center – 4 axes

Welding

C&S Machine prides itself on providing welding services both on and off-site. We have a fully-staffed welding department that can handle any size job. With our mobile welding service, we are able to provide Thomasville and surrounding areas “just in time” support in case of an emergency. We offer the following welding services:

  • MIG welding
  • TIG welding
  • Flux core welding
  • Stick welding
  • Brazing
  • Aluminum welding
  • Stainless welding

Our Welding Fabrication Department is equipped with the following equipment:

  • 1 – Manual Plasma Arc Cutting Torch
  • 5 – Oxy-Acetylene Torch Outfits
  • 1 – Ford F250 Truck equipped with a 250 AMP Portable Welder with Stick Welder, TIG Welder, MIG Welder, Plasma Cutting, Oxy-fuel Cutting, and Hydraulic Hose Repair
  • 10 – MIG Arc Welders
  • 3 – 250 AMP/300 AMP TIG Welders
  • 1 – 6′ Metal Roll
  • 1 – 50 Ton Press Brake
  • 2 – 40 Ton Ironworkers

Plasma/Oxy Fuel

Our Plasma/Oxy-fuel cutting department is equipped with the latest computer-controlled shape-cutting machines. They are designed to burn out very intricate parts to meet your specifications in single or multiple quantities, with the ability to nest parts to maximize material usage and reduce waste. We are equipped with 2 ESAB Plasma cutting machines:
  • 1 – 100 AMP CNC Plasma/Oxy-fuel machine with a 6′ x 12′ cutting board capability
  • 1 – 200 AMP CNC Plasma machine with a 10′ x 20′ cutting board capability

Waterjet

Our Waterjet cutting department is equipped with the latest computer-controlled cutting machine on the market. We are currently equipped with 1 Waterjet featuring the following capabilities:

  • 2004 Flow Flying Bridge Waterjet Model 6012
  • Dynamic Waterjet increases speed and reduces taper
  • Uniquely designed, which minimizes footprint by integrating pump into the backside of the machine frame, allowing all facets of a machine to be controlled by roll-around control
  • Cutting table size: 6′ x 12′
  • Travels: X-axis: 72″ Y axis: 144″ Z axis: 8″
  • Main motor: 50 HP, 460 VOLTS
  • Cutting speed ranges: 0-300 IPM

CNC Mills and Lathes

C & S Machine is equipped with the latest state-of-art CNC equipment in the Southeast. We have a CNC department that is fully staffed to handle all your needs. We use Haas, Fadal, and Alpha CNC machines that consist of five mills and three lathes. Our CNC department can handle any job, no matter the difficulty. We go the extra mile to ensure our craftsmanship and quality are at the utmost highest. Below you will find our exact equipment specifications:
  • 1 – 40/20 CNC Fadal Mill
  • 2 – 60/30 CNC Fadal Mill
  • 1 – 17″ CNC Alpha Lathe
  • 1 – 20 HP Haas CNC Lathe
  • 1 – 40 HP Haas CNC Lathe
  • 1 – ProtoTRAK CNC Mill
  • 1 – CNC Haas Mill
  • 1 – CNC Haas Mill with 4 axes

Grinding Department

  • 2 – Surface Grinders
  • 1 – Rockwell Hardness Tester
  • 1 – Drill Sharpener
  • 1 – Blanchard Grinder with 36” chuck

Heat Treating Department

  • 2 – Heat Treating Ovens

Auxillary Equipment Department

  • 1 – 100 Ton Hydraulic Press
  • 1 – 5 Ton Bench Press
  • 5 – Stand Grinders

Repair Service

We offer a wide variety of repair and complete rebuilding services. For more info on what we can do for you, call us!

For more information about our capabilities, contact us today or call us at 229-226-0901!

Machine Shop in  Thomasville, GA | C&S Machine Co.

Hours

Monday - Friday:
8:00 AM - 4:30 PM
Saturday & Sunday:
Closed